..probably NOT! This is a risky procedure which can kill, or BRICK, your camera.
The problem is, IP camera's are by-design, made to be connected through a network. Unlike a computer to which you have a keyboard-and-mouse direct-connection to the bios, you can only communicate you an IP camera through the network. In the process of updating camera software, you could potentially loose all ability to connect, and at that point your camera is DEAD.
So I don't recommend it, unless (a) you REALLY KNOW WHAT YOUR DOING [1], and (b), you don't care if your camera becomes a useless brick.
OK so if you want to proceed, here is an example of hacking a LINKSYS WVC54GCA.
Remember- its possible that
Your camera may never work again!
[1] - you should understand details like unix/linux commands, and in some cases, even how to disassemble the camera and solder on a new connector, and so on.
Imprnt are engaged in offering a quality range of Access Control System. Due to their efficient performance, minimum maintenance and high identification speed, the systems are highly appreciated by our clients.
ReplyDeleteThis post is very helpful .Thanks a lot for this post that share with us . You can get more information here:
ip camera
goedkope ip camera
ip camera kopen
bewakingscamera
bewakingscamera kopen
goedkope bewakingscamera
of course every nation must respect copyright but there are third world countries that just can’t respect copyright at all; เครื่องบันทึกกล้องวงจรปิด dvr
ReplyDelete